Terminal cable can be arbitrarily selected number of wires and spacing, so that the linkage is more convenient, greatly reducing the volume of electronic products, reduce production costs, improve production efficiency, most suitable for moving parts and the motherboard between the PCB board to PCB board, miniaturization of electrical equipment for data transmission cable. Common specifications are 0.5mm, 0.8mm, 1.0mm, 1.25mm, 1.27mm, 1.5mm, 2.0mm, 2.54mm, etc. Various pitches of flexible cable wire.

Terminal cable is now widely used in a variety of printers print head and the connection between the motherboard, plotters, scanners, copiers, audio, LCD appliances, fax machines, various video players and other products signal transmission and board board connection. In modern electrical equipment, almost everywhere.

The common models of terminal wires are as follows:

Type A: Both ends are connected and the reinforcement plate is pasted on the insulating tape.

Type B: Reinforcement plate cross directly pasted on the insulating tape.

Type C: Reinforcement plates at both ends are pasted directly on the conductor.

Type D: Reinforcement plates at both ends are cross-pasted directly to the conductor; Type E: Reinforcement plates at one end are cross-pasted directly to the conductor.

Type E: one end of the reinforcement plate on the insulating tape, the other end of the direct solder; Type F: two ends of the reinforcement plate directly on the insulating tape, the internal half of the peeling.

Type G: Solder directly on both ends.